Help: Audiotrak Maya 44 USB doesn't work

classic Classic list List threaded Threaded
11 messages Options
Reply | Threaded
Open this post in threaded view
|

Help: Audiotrak Maya 44 USB doesn't work

Harri Tuomela
Hi!

I'm trying to get Audiotrak Maya 44 USB audio interface [1] working on
Debian Sarge machine (alsa 1.0.8).

When I plug in the device, the following messages are written into
/var/log/kern.log:

  usb 1-2: new full speed USB device using address 9
  snd-usb-audio: probe of 1-2:1.0 failed with error -5
  hiddev96: USB HID v1.00 Device [AUDIOTRAK MAYA44 USB] on usb-0000:00:1d.0-2

/proc/bus/usb/devices:

  T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
  D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
  P:  Vendor=0a92 ProdID=0091 Rev= 1.00
  S:  Manufacturer=AUDIOTRAK
  S:  Product=MAYA44 USB
  C:* #Ifs= 4 Cfg#= 1 Atr=00 MxPwr=250mA
  I:  If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
  I:  If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
  I:  If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
  E:  Ad=01(O) Atr=09(Isoc) MxPS= 384 Ivl=1ms
  I:  If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
  I:  If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
  E:  Ad=82(I) Atr=0d(Isoc) MxPS= 384 Ivl=1ms
  I:  If#= 3 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
  E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=16ms

The interface is not found by alsa. Only machine's built-in audio chip
is in /proc/asound/cards:

  0 [I82801DBICH4   ]: ICH - Intel 82801DB-ICH4
                       Intel 82801DB-ICH4 at 0xa0100000, irq 11

Actually, alsaconf does not find the device either.

What's wrong? Someone else has definetly got it working somehow [2].

-Harri

[1] http://www.audiotrak.net/maya44usb.htm
[2] http://elists.resynthesize.com/linux-audio-users/2005/01/1312611/
Reply | Threaded
Open this post in threaded view
|

Re: Help: Audiotrak Maya 44 USB doesn't work

Markus Herhoffer
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello!

I have it working under Gentoo. The Maya 44 USB works with the module
"snd-usb-audio". But you should check the settings for your hotplugd. I
had the problem that hotplug tried to manage the soundcard but it was
not able to configure it properly. After disabeling this the card worked
perfectly.

CU
Markus

http://d135-1r43.de

Harri Tuomela wrote:

> Hi!
>
> I'm trying to get Audiotrak Maya 44 USB audio interface [1] working on
> Debian Sarge machine (alsa 1.0.8).
>
> When I plug in the device, the following messages are written into
> /var/log/kern.log:
>
>   usb 1-2: new full speed USB device using address 9
>   snd-usb-audio: probe of 1-2:1.0 failed with error -5
>   hiddev96: USB HID v1.00 Device [AUDIOTRAK MAYA44 USB] on usb-0000:00:1d.0-2
>
> /proc/bus/usb/devices:
>
>   T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
>   D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
>   P:  Vendor=0a92 ProdID=0091 Rev= 1.00
>   S:  Manufacturer=AUDIOTRAK
>   S:  Product=MAYA44 USB
>   C:* #Ifs= 4 Cfg#= 1 Atr=00 MxPwr=250mA
>   I:  If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
>   I:  If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
>   I:  If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
>   E:  Ad=01(O) Atr=09(Isoc) MxPS= 384 Ivl=1ms
>   I:  If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
>   I:  If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
>   E:  Ad=82(I) Atr=0d(Isoc) MxPS= 384 Ivl=1ms
>   I:  If#= 3 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
>   E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=16ms
>
> The interface is not found by alsa. Only machine's built-in audio chip
> is in /proc/asound/cards:
>
>   0 [I82801DBICH4   ]: ICH - Intel 82801DB-ICH4
>                        Intel 82801DB-ICH4 at 0xa0100000, irq 11
>
> Actually, alsaconf does not find the device either.
>
> What's wrong? Someone else has definetly got it working somehow [2].
>
> -Harri
>
> [1] http://www.audiotrak.net/maya44usb.htm
> [2] http://elists.resynthesize.com/linux-audio-users/2005/01/1312611/

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFDuDKy4ihw6BWdedERAv7jAJ0VXYRIR46M3eJLmtfcqErJDhgVFwCgwxOD
1TMf6LuenlP/sqRkaPDomYQ=
=V0jp
-----END PGP SIGNATURE-----
Reply | Threaded
Open this post in threaded view
|

Re: Help: Audiotrak Maya 44 USB doesn't work

Christoph Eckert-2
In reply to this post by Harri Tuomela

> hiddev96: USB HID v1.00 Device

your hotplug thinks it is a HID device (mice, keyboards etc.). I'm sure
the device registers as HID device on the bus to prvent windows to load
the USB audio driver.

On Linux, simply do a

modprobe snd_usb_audio
and check
cat /proc/asound/cards

and I bet you're in business.

If so, adjust your hotplug scripts or ensure snd_usb_audio gets loaded
statically during machine boot.



Best regards


ce
Reply | Threaded
Open this post in threaded view
|

Re: Help: Audiotrak Maya 44 USB doesn't work

Harri Tuomela
On Sun, Jan 01, 2006 at 08:37:55PM +0100, Christoph Eckert wrote:

>
> > hiddev96: USB HID v1.00 Device
>
> the device registers as HID device on the bus to prvent windows to load
> the USB audio driver.
>
> On Linux, simply do a
>
> modprobe snd_usb_audio
> and check
> cat /proc/asound/cards
>
> and I bet you're in business.

Thanks! However, it does not seem to help:

~# modprobe -v snd_usb_audio
install modprobe --ignore-install snd-usb-audio && /lib/alsa/modprobe-post-install snd-usb-audio
insmod /lib/modules/2.6.8/kernel/sound/usb/snd-usb-audio.ko index=1 vid=0x0a92 pid=0x0091
~# cat /proc/asound/cards
0 [I82801DBICH4   ]: ICH - Intel 82801DB-ICH4
                     Intel 82801DB-ICH4 at 0xa0100000, irq 11
~#

Before that I removed the hotplug configured module from kernel.

-Harri
Reply | Threaded
Open this post in threaded view
|

Re: Help: Audiotrak Maya 44 USB doesn't work

Harri Tuomela
In reply to this post by Markus Herhoffer
On Sun, Jan 01, 2006 at 07:51:14PM +0000, Markus Herhoffer wrote:
>
> I had the problem that hotplug tried to manage the soundcard but it
> was not able to configure it properly. After disabeling this the card
> worked perfectly.

Hi again! I removed the hotplug configured module from kernel and tried
to install it manually:

:~# insmod /lib/modules/2.6.8/kernel/sound/usb/snd-usb-audio.ko index=1 vid=0x0a92 pid=0x0091

However, the device does not seem to appear in /proc/asound/cards.

-Harri
Reply | Threaded
Open this post in threaded view
|

Re: Help: Audiotrak Maya 44 USB doesn't work

Christoph Eckert-2
In reply to this post by Harri Tuomela
Hm,


> Thanks! However, it does not seem to help:
>
> ~# modprobe -v snd_usb_audio
> install modprobe --ignore-install snd-usb-audio &&
> /lib/alsa/modprobe-post-install snd-usb-audio insmod
> /lib/modules/2.6.8/kernel/sound/usb/snd-usb-audio.ko index=1
> vid=0x0a92 pid=0x0091 ~# cat /proc/asound/cards
> 0 [I82801DBICH4   ]: ICH - Intel 82801DB-ICH4
>                      Intel 82801DB-ICH4 at 0xa0100000, irq 11
> ~#
>
> Before that I removed the hotplug configured module from kernel.

can't really help you on this issue, but I successfully ran a Terratec
Aureon USB until I bought a better device. The Aureon is somehow very
similar to the Maya.


THe only thing I see is that you run a 2.6.8 while I always used a
2.6.10; maybe snd_usb_audio didn't know the Maya in 2.6.8?


Best regards


ce

Reply | Threaded
Open this post in threaded view
|

Re: Help: Audiotrak Maya 44 USB doesn't work

Frank Barknecht
In reply to this post by Harri Tuomela
Hallo,
Harri Tuomela hat gesagt: // Harri Tuomela wrote:

> Hi again! I removed the hotplug configured module from kernel and tried
> to install it manually:
>
> :~# insmod /lib/modules/2.6.8/kernel/sound/usb/snd-usb-audio.ko index=1 vid=0x0a92 pid=0x0091
>
> However, the device does not seem to appear in /proc/asound/cards.

It's a FAQ: make sure, hotplug doesn't load the OSS module by adding
usbaudio to /etc/hotplug/blacklist. Or delete the usbaudio module
file, you will neverever need it.

Ciao
--
 Frank Barknecht                 _ ______footils.org_ __goto10.org__
Reply | Threaded
Open this post in threaded view
|

Re: Help: Audiotrak Maya 44 USB doesn't work

Christoph Eckert-2

> It's a FAQ: make sure, hotplug doesn't load the OSS module by adding
> usbaudio to /etc/hotplug/blacklist. Or delete the usbaudio module
> file, you will neverever need it.

regardless that you're absolutely right, even if the OSS module gets
loaded the device should appear in /proc/asound/cards as soon as
snd_usb_audio gets loaded.


Best regards


ce
Reply | Threaded
Open this post in threaded view
|

Re: Help: Audiotrak Maya 44 USB doesn't work

Harri Tuomela
In reply to this post by Frank Barknecht
On Sun, Jan 01, 2006 at 10:54:05PM +0100, Frank Barknecht wrote:

> Harri Tuomela hat gesagt: // Harri Tuomela wrote:
> >
> > Hi again! I removed the hotplug configured module from kernel and
> > tried to install it manually:
> >
> > :~# insmod /lib/modules/2.6.8/kernel/sound/usb/snd-usb-audio.ko index=1 vid=0x0a92 pid=0x0091
> >
> > However, the device does not seem to appear in /proc/asound/cards.
>
> It's a FAQ: make sure, hotplug doesn't load the OSS module by adding
> usbaudio to /etc/hotplug/blacklist.

Hotplug didn't load the OSS audio module (called 'audio'). I checked
that with lsmod.  However, I added it into blacklist, but the problem
still remains.

-Harri
Reply | Threaded
Open this post in threaded view
|

Re: Help: Audiotrak Maya 44 USB doesn't work

Frank Barknecht
Hallo,
Harri Tuomela hat gesagt: // Harri Tuomela wrote:
> Hotplug didn't load the OSS audio module (called 'audio'). I checked
> that with lsmod.  However, I added it into blacklist, but the problem
> still remains.

Hm, now I'm a bit at loss. If you can do this, then I would try a
newer kernel. 2.6.8 is a bit old already. It might be, that there are
issues in other areas, for example with your USB controller, that may
be fixed in current kernels. You could also do a test with some live
distribution first that uses ALSA and a newer kernel like Ubuntu.

Ciao
--
 Frank Barknecht                 _ ______footils.org_ __goto10.org__
Reply | Threaded
Open this post in threaded view
|

Re: Help: Audiotrak Maya 44 USB doesn't work

nigel henry
In reply to this post by Harri Tuomela
On Sunday 01 January 2006 23:26, Harri Tuomela wrote:

> On Sun, Jan 01, 2006 at 10:54:05PM +0100, Frank Barknecht wrote:
> > Harri Tuomela hat gesagt: // Harri Tuomela wrote:
> > > Hi again! I removed the hotplug configured module from kernel and
> > >
> > > tried to install it manually:
> > > :~# insmod /lib/modules/2.6.8/kernel/sound/usb/snd-usb-audio.ko index=1
> > > : vid=0x0a92 pid=0x0091
> > >
> > > However, the device does not seem to appear in /proc/asound/cards.
> >
> > It's a FAQ: make sure, hotplug doesn't load the OSS module by adding
> > usbaudio to /etc/hotplug/blacklist.
>
> Hotplug didn't load the OSS audio module (called 'audio'). I checked
> that with lsmod.  However, I added it into blacklist, but the problem
> still remains.
>
> -Harri

Hi Harri. I havn't been following this thread, but saw Frank's reply about the
2.6.8 kernel. Are you using Debian Sarge by any chance, because even though I
know nothing about your USB soundcard, I did have problems with the USB for
my USB midi keyboard, and the 2.6 kernel. If you are using Sarge, there are a
few things you can try, but let me know first, as I don't want to waste your
time. Nigel.